Same great Wakesurf Balance Boards, with a special deal for all you bargain hunters!  

These are lightly cosmetically blemished boards (minor imperfections with full functionality) that have been inspected and passed our high standards. We are passing the savings on to you. Full warranty included!

Get them before they are gone! 

NEW INTEGRATED APP! 

After over a year of development, our high tech in-home wakesurf training system is ready for some shreddy! Click here to check it out

The ONLY Balance Board Made for Wakesurfing

Practice wakesurfing between boat outings, during the off season, or while lounging at home. The soft yet tough EVA foam pad not only makes it feel like your favorite wakesurf board, but makes it comfortable to use while barefoot. The Wakesurf Balance Board is engineered to have a "surfy" feel. With different rocker profiles for heel-to-toe motion and tail-to-nose motion, this board will simulate balance on a surfboard. Want a more mellow experience? Use it on the carpet. Ready to up your skills? Use it on a hard surface.

Improve Your Skills

Get your 180's, 360's, 540's, and other spin combos consistent in no time. Work on surf-specific balance at home. Practice foot motion and pumping. Bag those shove-its. Practicing on the Wakesurf Balance Board will help you master your tricks with much less waiting in between attempts. Didn't make it all the way around on your spin? Just hop back on the board and try a dozen more times in a matter of minutes so you'll be ready when you hit the water. The Wakesurf Balance Board will give you a great workout while improving skills and having fun all at the same time.

“Classic” vs “Barefoot” Model

Our Classic model has firmer foam for maximum durability. Tough enough for shoes, but soft enough for bare feet.

Our Barefoot model has softer foam than our classic model, and should be used with barefeet only. Pick up one of these at a steep discount while we still have them available! We received a batch of softer foam than usual from our supplier. This is a way to get on a balance board at a lower price if you are fine with using it without shoes! We backup all of our products, and the barefoot model still comes with a full warranty. (Note: Using shoes on the barefoot model may damage the foam, but the board will still be perfectly function

Minor Cosmetic Blemish

Our Minor Cosmetic Blemish boards are fully functional and carry the full manufacturer's warranty. Defects on these boards may include minor traction pad misalignment/imperfections, visible core material between base and traction pad, or plastic base abnormalities.

Moderate Cosmetic Blemish

Like the minor cosmetic blemish boards, these boards are fully functional and carry the full manufacturer's warranty but the defects are more visible. Though they aren't quite as pretty, these boards still let you get your shred on just like you would with any Lakesurf balance board. Possible defects are similar to those listed above for minor cosmetic blemishes, just more pronounced.

 EZ Drive Thrusters Partnership

Our friends at EZ Drive Thruster are offering a free Wakesurf Balance Board with any thruster purchase. EZ Drive Thruster is a compact, powerful, energy efficient, thruster. It’s easy to install and is designed to put you in total control of your boat! Allows you to U-Turn in under 10 seconds for increased swimmer safety and 30% less fuel usage!

Same great Wakesurf Balance Boards, with a special deal for all you bargain hunters!  

These are refurbished balance boards that have been inspected and passed our high standards. We are passing the savings on to you. Full warranty included!

Get them before they are gone! 

NEW INTEGRATED APP! 

After over a year of development, our high tech in-home wakesurf training system is ready for some shreddy! Click here to check it out

The ONLY Balance Board Made for Wakesurfing

Practice wakesurfing between boat outings, during the off season, or while lounging at home. The soft yet tough EVA foam pad not only makes it feel like your favorite wakesurf board, but makes it comfortable to use while barefoot. The Wakesurf Balance Board is engineered to have a "surfy" feel. With different rocker profiles for heel-to-toe motion and tail-to-nose motion, this board will simulate balance on a surfboard. Want a more mellow experience? Use it on the carpet. Ready to up your skills? Use it on a hard surface.

Improve Your Skills

Get your 180's, 360's, 540's, and other spin combos consistent in no time. Work on surf-specific balance at home. Practice foot motion and pumping. Bag those shove-its. Practicing on the Wakesurf Balance Board will help you master your tricks with much less waiting in between attempts. Didn't make it all the way around on your spin? Just hop back on the board and try a dozen more times in a matter of minutes so you'll be ready when you hit the water. The Wakesurf Balance Board will give you a great workout while improving skills and having fun all at the same time.

“Classic” vs “Barefoot” Model

Our Classic model has firmer foam for maximum durability. Tough enough for shoes, but soft enough for bare feet.

Our Barefoot model has softer foam than our classic model, and should be used with barefeet only. Pick up one of these at a steep discount while we still have them available! We received a batch of softer foam than usual from our supplier. This is a way to get on a balance board at a lower price if you are fine with using it without shoes! We backup all of our products, and the barefoot model still comes with a full warranty. (Note: Using shoes on the barefoot model may damage the foam, but the board will still be perfectly functional)

Phone Holder Pre-installed

Our Refurbished boards with pre-installed phone holder turn your Lakesurf Balance Board into a home wakesurf simulator at a discounted rate! Simply secure your phone while using our free Laskesurf Balance Board Mobile App and cast to your tv to get interactive tutorials led by 2021 wakesurfing world champ Sean Silveira, a realistic wakesurf simulator, and more!

Learn more about the Lakesurf Balance Board app HERE.

EZ Drive Thrusters Partnership

Our friends at EZ Drive Thruster are offering a free Wakesurf Balance Board with any thruster purchase. EZ Drive Thruster is a compact, powerful, energy efficient, thruster. It’s easy to install and is designed to put you in total control of your boat! Allows you to U-Turn in under 10 seconds for increased swimmer safety and 30% less fuel usage!

Introducing Slide Island - the only inflatable water play mat that doubles as a boat slide! Our patent pending design makes it easy to switch between “slide mode” and “mat mode,” so you can focus on the fun.

Slide Island mounts securely and easily to your boat in slide mode so your whole crew, both young and not so young, can slide with confidence. Thanks to its rugged drop stitch construction and thermal welded seams, Slide Island is built to stand the test of time — that means you have one less thing to worry about!

Comfortable handles make Slide Island easy to move and built-in foam steps make it simple for even the smallest sliders to scramble back up for another go. When the fun is over, Slide Island folds up small enough to easily drop into a storage locker in your boat.

Dial up the fun with Slide Island, this summer’s must-have new boating accessory!

Features:

• Wide, smooth sliding surface
• EVA foam steps for smaller sliders
• Soft, foam filled handles for easy maneuvering
• High strength nylon webbing support straps for use in "slide mode"
• Bend locator straps for simple and consistent set-up
• 9 tie-off loop locations to ensure compatibility with your boat
• Folds up small for easy storage in a boat locker (2' x 2' x 8")

Included in Package:

• Slide Island Inflatable
• Carry Case
• Hand Pump
• Repair Kit
• User Guide
• Tie-off rope to secure slide/mat to boat

Specs:

• 5'4" x 10'6" x 4"
• 45 lbs
• High pressure Halkey-Roberts valve
• UV resistant PVC coated drop stitch fabric and sidewalls
  
• Thermal welded and taped seams
• 300 lb weight limit in slide mode

If, for any reason, you are not satisfied with your purchase you may return your product for a refund of the purchase amount (minus shipping costs) within 30 days of purchase. Slide Island comes with a 1-year warranty against defects in materials or workmanship.

Same great Wakesurf Edge Inline Wakeshaper, with a special deal for all you bargain hunters!  

These are refurbished Wakeshapers that have been inspected and passed our high standards. We are passing the savings on to you. Full warranty included!

Get them before they are gone! 

Best Wakesurfing Wave, Guaranteed

Specially designed to fit boats with stepped hulls, narrow strakes, and heavy curves, the new Wakesurf Edge Inline shaper features the same water displacement wing as the award winning Wakesurf Edge Pro2 model. Produced by Liquid Force, designed by our own engineers here at Lakesurf! Wakesurf Edge is the winner of the WSIA Innovation Award in 2019 - the ONLY wake shaper to be recognized!

Wakesurf Edge has been proven to make the best wave in the industry. Try it, love it, or your money back. We offer a 45-day satisfaction guarantee, and a full year manufacturer's warranty on function. (See our return policy for details.)

Slim and Secure Suction Cups – Five inline 2” rubber suction cups make the Inline shaper compatible with virtually any hull design.

Large Water Displacement Wing For maximum wave height
Wake Shaper face 9 x 16 inches = 144sq inch face

Patented Concave Water Channeling Wing
Our concave channeling wing surface pushes more water to increase the length of the wave, while keeping the face super clean! (US PATENT #9,914,509)

Made with Durable Rust Free Materials
Built with impact resistant, lite weight glass filled nylon and rust free stainless steel hardware. The Wakesurf Edge Inline shaper is long lasting; won’t rust or stain your boat.

Built In Flotation
Don’t worry about your wake shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed air tight.

FREQUENTLY ASKED QUESTIONS

Will it work on my boat?

The Inline Shaper is designed to fit hulls with more complicated surface designs. This shaper needs a flat surface measuring 3” tall by 13” long. If there is a lip/step above the attachment area on your hull that protrudes more than 2", then you will need a little more space. If your hull has an outward curve of more than ¼” over 5”, this shaper is exactly what you need!

Can I use this on my inboard/outboard or outboard boat?

Never surf behind an outboard or an inboard/outboard boat for safety reasons. We have not tested on such boats, and strongly discourage use on such boats.

Will it work with built-in surf systems?

Yes, and in most cases, it will result a better wave than your stock built-in surf system. For surf systems with tabs that come out of the sides of the hull such as Malibu's Surf Gate, you will achieve best results by placing the Wakesurf Edge Shaper in front of the surf gate, but higher up on the hull. This way some water is deflected by both the Wakesurf Edge and the Surfgate, and you will see a noticeable increase in wave length. For surf systems that use tabs that flip down, you will see the best results by simply not using those tabs. These types of systems fight against the Wakesurf Edge Shaper when engaged.

Can I move it around to create a different type of wave, or is there only one ideal spot?

Each hull is a little different, and different results can be achieved by slightly changing the angle at which you attach your shaper, and by slightly changing the distance from the back of the boat where you attach it. Your ideal setup will be a matter of personal preference, so we recommend trying different positions and angles to find your favorite spot. Generally, moving it further back with make the wave steeper, and moving it further forward will make the wave longer. Thanks to our water channeling design, angling the nose of the shaper up can also help increase the length of the wave on some boats. That being said, it is super easy to move around, and it will work beautifully in many different locations and angles.

Should I worry about it falling off?

No! If installed properly, it will stay on all day, and never leave a mark on your hull!

Will it float?

Yes! It floats high enough in the water to spot it at a distance if it is dropped. If it is attached properly, it won't come off, so this is rarely even an issue.

Should I tether it?

Do not tether! Part of making the best shaper in the world requires it to induce greater forces than other devices, and tethering it could cause it to slingshot back into the boat, causing damage or injury. If for some reason it ends up detached in the water, it floats well and can be retrieved easily.

Will this work on Jetboats?

None of the aftermarket shapers work very well on jetboats due to the low draft and loose tracking of jetboat hulls.

Will this work on my Jetski?

No. Jetskis are too small and too light to produce a large enough wave to surf, even with a Wakesurf Edge Shaper.

The Lakesurf Promise

We engineered Wakesurf Edge Shapers to make the best wave. We are so certain that Wakesurf Edge will make a better wave than any other shaper out there, that we let you try it out completely RISK FREE with free shipping AND free returns within 30 days of purchasing! If you don't love your new wave, you can return your Wakesurf Edge shaper for refund any time during the trial period.

Your Wakesurf Edge Shaper has a full warranty for 1 year from purchase date against defects and premature failure.

INTERNATIONAL CUSTOMERS: For shipment outside of the United States, customers are responsible to pay any customs duties or fees that may be assessed by the destination county.

Best Wakesurfing Wave, Guaranteed

The Mega: Biggest wave in the industry! Upgrade your wave with Wakesurf Edge. Produced by Liquid Force, designed by our own engineers here at Lakesurf! Winner of the WSIA Innovation Award in 2019 - the ONLY wake shaper to be recognized! 

Wakesurf Edge has been proven to make the best wave in the industry. Try it, love it, or your money back. We offer a 45-day satisfaction guarantee, and a full year manufacturer's warranty on function. (See our return policy for details.)

HUGE Water Displacement Wing For maximum wave height!
Wolds largest wakeshaper! Face measures 14 x 18 inches (252 square inches). Beats all other shapers, and most built-in surf systems!

Patented Concave Water Channeling Wing
The concave water channeling surface accelerates the water it displaces, increasing the length and height of the wake while keeping it crisp and clean. (US PATENT #9,914,509)

Super Strong Suction Cup Attachment
The 4.5 inch rubber suction cups won’t damage gel coat or leave black markings on your boat. Easy to adjust on the fly. No ugly Velcro or safety tethers required.

Made with Durable Rust Free Materials
Built with impact resistant, lightweight, glass-filled nylon and rust free stainless steel hardware. The Wakesurf Edge Mega shaper is long lasting; won’t rust or stain your boat.

Built In Flotation
Don’t worry about your wake shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed air tight.

Frequently Asked Questions

Will it work on my boat?

Wakesurf Edge works on most boats, with a few exceptions. Please see the above images for boat compatibility.

To make the most of the MEGA WSE, your boat should have a prop meant for wake sports, a 325hp (or greater) engine, and a ballast system. Otherwise, stick with the Wakesurf Edge Pro 2.

Can I use this on my inboard/outboard or outboard boat?

Never surf behind an outboard or an inboard/outboard boat for safety reasons. We have not tested on such boats, and strongly discourage use on such boats.

Will it work with built-in surf systems?

Yes, and in most cases, it will result a better wave than your stock built-in surf system. For surf systems with tabs that come out of the sides of the hull such as Malibu's Surf Gate, you will achieve best results by placing the Wakesurf Edge Shaper in front of the surf gate, but higher up on the hull. This way some water is deflected by both the Wakesurf Edge and the Surfgate, and you will see a noticeable increase in wave length. For surf systems that use tabs that flip down, you will see the best results by simply not using those tabs. These types of systems fight against the Wakesurf Edge Shaper when engaged.

Can I move it around to create a different type of wave, or is there only one ideal spot?

Each hull is a little different, and different results can be achieved by slightly changing the angle at which you attach your shaper, and by slightly changing the distance from the back of the boat where you attach it. Your ideal setup will be a matter of personal preference, so we recommend trying different positions and angles to find your favorite spot. Generally, moving it further back with make the wave steeper, and moving it further forward will make the wave longer. Thanks to our water channeling design, angling the nose of the shaper up can also help increase the length of the wave on some boats. That being said, it is super easy to move around, and it will work beautifully in many different locations and angles.

Should I worry about it falling off?

No! If installed properly, it will stay on all day, and never leave a mark on your hull!

Will it float?

Yes! It floats high enough in the water to spot it at a distance if it is dropped. If it is attached properly, it won't come off, so this is rarely even an issue.

Should I tether it?

Do not tether! Part of making the best shaper in the world requires it to induce greater forces than other devices, and tethering it could cause it to slingshot back into the boat, causing damage or injury. If for some reason it ends up detached in the water, it floats well and can be retrieved easily.

Will this work on Jetboats?

None of the aftermarket shapers work very well on jetboats due to the low draft and loose tracking of jetboat hulls.

Will this work on my Jetski?

No. Jetskis are too small and too light to produce a large enough wave to surf, even with a Wakesurf Edge Shaper.

The Lakesurf Promise

We engineered Wakesurf Edge Shapers to make the best wave. We are so certain that Wakesurf Edge will make a better wave than any other shaper out there, that we let you try it out completely RISK FREE with free shipping AND free returns within 30 days of purchasing! If you don't love your new wave, you can return your Wakesurf Edge shaper for refund any time during the trial period.

Your Wakesurf Edge Shaper has a full warranty for 1 year from purchase date against defects and premature failure.

INTERNATIONAL CUSTOMERS: For shipment outside of the United States, customers are responsible to pay any customs duties or fees that may be assessed by the destination county.

Same great Wakesurf Edge Folding Mega 250 Wakeshaper, with a special deal for all you bargain hunters!  

These are refurbished Wakeshapers that have been inspected and passed our high standards. We are passing the savings on to you. Full warranty included!

Get them before they are gone! 

Create massive surf waves instantly with the Wakesurf Edge Folding Mega Wakeshaper! It's the biggest wake shaper on the market, and its super sticky suction cups make it cling to your boat like a barnacle without marking up the hull. Plus, it folds flat for easy storage when you're done shredding the waves! How cool is that?

Shift the Wakesurf Edge location on the fly to create deeper pockets or a longer wake face with more push. The Mega Folding 250 requires a mounting surface 5" tall by 12" long - clear of hull steps greater than 3/8".

Frequently Asked Questions

Will it work on my boat?

Wakesurf Edge works on most boats, with a few exceptions. Please see the above images for boat compatibility.

To make the most of the Folding Mega, your boat should have a prop meant for wake sports, a 325hp (or greater) engine, and a ballast system. Otherwise, stick with the Wakesurf Edge Pro 2.

Can I use this on my inboard/outboard or outboard boat?

Never surf behind an outboard or an inboard/outboard boat for safety reasons. We have not tested on such boats, and strongly discourage use on such boats.

Will it work with built-in surf systems?

Yes, and in most cases, it will result a better wave than your stock built-in surf system. For surf systems with tabs that come out of the sides of the hull such as Malibu's Surf Gate, you will achieve best results by placing the Wakesurf Edge Shaper in front of the surf gate, but higher up on the hull. This way some water is deflected by both the Wakesurf Edge and the Surfgate, and you will see a noticeable increase in wave length. For surf systems that use tabs that flip down, you will see the best results by simply not using those tabs. These types of systems fight against the Wakesurf Edge Shaper when engaged.

Can I move it around to create a different type of wave, or is there only one ideal spot?

Each hull is a little different, and different results can be achieved by slightly changing the angle at which you attach your shaper, and by slightly changing the distance from the back of the boat where you attach it. Your ideal setup will be a matter of personal preference, so we recommend trying different positions and angles to find your favorite spot. Generally, moving it further back with make the wave steeper, and moving it further forward will make the wave longer. Thanks to our water channeling design, angling the nose of the shaper up can also help increase the length of the wave on some boats. That being said, it is super easy to move around, and it will work beautifully in many different locations and angles.

Should I worry about it falling off?

No! If installed properly, it will stay on all day, and never leave a mark on your hull!

Will it float?

Yes! It floats high enough in the water to spot it at a distance if it is dropped. If it is attached properly, it won't come off, so this is rarely even an issue.

Should I tether it?

Do not tether! Part of making the best shaper in the world requires it to induce greater forces than other devices, and tethering it could cause it to slingshot back into the boat, causing damage or injury. If for some reason it ends up detached in the water, it floats well and can be retrieved easily.

Will this work on Jetboats?

None of the aftermarket shapers work very well on jetboats due to the low draft and loose tracking of jetboat hulls.

Will this work on my Jetski?

No. Jetskis are too small and too light to produce a large enough wave to surf, even with a Wakesurf Edge Shaper.

The Lakesurf Promise

We engineered Wakesurf Edge Shapers to make the best wave. We are so certain that Wakesurf Edge will make a better wave than any other shaper out there, that we let you try it out completely RISK FREE with free shipping AND free returns within 30 days of purchasing! If you don't love your new wave, you can return your Wakesurf Edge shaper for refund any time during the trial period. 

Your Wakesurf Edge Shaper has a full warranty for 1 year from purchase date against defects and premature failure.

INTERNATIONAL CUSTOMERS: For shipment outside of the United States, customers are responsible to pay any customs duties or fees that may be assessed by the destination county.